Induction unit
Description
Art. number: 907432
Proheat 35 kW, 400-460V, 50/60Hz.
The ProHeat™ 35 induction power source features a built-in temperature control that can be programmed manually or temperature-related using up to four thermocouples. With its high efficiency of 90%, the Proheat™ 35 power source can transfer more energy into the workpiece. This results in significantly lower energy costs compared to other heating methods. A ProHeat™ 35 power source has two outputs and can drive one or two induction cables simultaneously.
Maximum pre-heating temperature 788°C
Power supply 400–460 V, 3-phase, 50/60 Hz 460–575 V, 3-phase, 60 Hz Current consumption at rated power 400 V: 60 amperes 460 V: 50 amperes 575 V: 40 amperes.
Rated output power 35 kW at 100% duty cycle
Power source dimensions (H x W x D) 699 x 552 x 933 mm
Power source weight Net: 103 kg Gross: 120 kg
Heating cables
Description
Category: Induction equipment
Art. number: 300045
- 30 ft. (300045)
- 50 ft. (300046)
- 80 ft. (300047)
- 140 ft. (300048)
- 160 ft. (300566)
The heating cable ensures heat transfer. The silicone hose contains a special copper conductor, specifically designed to handle high-frequency current for optimal efficiency. The hose also carries the coolant that cools the copper conductor. The hose is reinforced for a long lifespan.
Output cables
Description
Category: Induction equipment
Art. number: 300180
Output cable. Available lengths:
- 10 ft. (300180)
- 25 ft. (195402)
- 50 ft. (195403)
- 75 ft. (300598)
The output extension cable connects the liquid-cooled heating cable to the induction unit. Two red coupling hoses are always supplied with the output cable.
Rolling Inductor
Description
Art. number: 301117
Proheat rolling inductor, incl. output cable.
The rolling inductor can be used on the Proheat™ 35. This application is specifically designed to preheat moving objects during welding. Due to the inductor’s compact and flexible design, this reduces setup time and costs. Through localized heat application, minimal power is lost, resulting in rapid heating. The Rolling inductor is ideal for use with pipe spools in the manipulator. It is possible to connect 2 Rolling inductors to 1 Proheat™ 35, with the 45kW power being distributed proportionally. Materials can be heated up to 315⁰C.